I
I
I
PRODUCTS - Reverse Osmosis Systems
ROSL Series Reverse Osmosis Systems

ROSL Series Reverse Osmosis Systems

Standard design of ROSL series reverse osmosis units is made according to 2000 ppm TDS (total dissolved solid matter) value. Systems’ operating efficiency is determined by making project specific designs according to the properties of raw water.

With 3 m3/hour and higher capacities, it provides a perfect solution for treatment of potable water, general utility water and process water. Can be used in numerous areas such as apartment blocks, hotels, hospitals, holiday resorts, municipalities, industrial facilities, bottling facilities etc. System contains PLC which is designed for controlling all of the equipments and does not need human intervention.

Standard Features
• 304 SS Chassis
• Conductivity meter on permeate line
• Flushing (rinsing) valve
• 5 micron filtration
• Entrance automatic valve
• Permeate and wastewater flovvmeter
• Low and high pressure manomeler
• Low and high pressure svvitches
• Low pressure lines PVC
• High pressure lines SS 304
• SS 304 vertical axle high pressure pump
• Automation panel
• Min. 3 bar entrance pressure requirement
• Max 18 bar operating pressure
• 300 psi (20 bar) resistant FRP membrane sheath
• 20 bar resistant membrane

Optional Features
• Acid dosage unit
• Antiscalant dosage unit
• Sodiummetabisulphide dosage unit
• pH and ORP control units
• Chemical washing unit (On seperate skid)
• 316 L Stainless Steel piping

Advantages
• Easy to operate without any need tor full time operator
• Low operating cost
• Ability to start and rinse automatically
• Easy to control visually by automation panel
• Fully Automation alarms
• System status indicators on automation panel

Design Criteria
• TDS < 2000 ppm
• Recovery ~% 50-60
• 20 °C nominal operating temperature
• SDI< 3
• Iron < 0,01 mg/l
• Manganese/ Alluminium < 0,025 mg/l
• Barium, Strontium , rare
• Boron: none
• Silica < 20 mg/l
• Free Chlorine, Oxidant Material: none
• Hydrocarbons, Oil and Grease: none
• Hydrogen Sulphide: none
• BOD, COD: none
• Bacteriologic Contaminants: None