I
I
I
PRODUCTS - Reverse Osmosis Systems
ROE Series Reverse Osmosis Systems

ROE Series Reverse Osmosis Systems

With 75 lt/hour - 220 lt/hour treatment capacity, it provides a perfect solution for treatment of potable water, general utility water and process water. Can be used conveniently in villas, restaurants and cafes (ice and soda machines) and laboratories. Economical series Reverse Osmosis Systems both can provide economical advantage and ease of handling as it is automatic.

Standard Features
• ST37 chassis coated with electrostatic dye
• Conductivity meter on permeate line
• Entrance automatic valve
• 5 micron filtration
• Permeate and wastewater flowmeter
• Low and high pressure manometer
• Pressure switches
• All piping lines PVC
• Automation panel
• Min. 3 bar entrance pressure requirement
• Max 16 bar operating pressure
• 300 psi (20 bar) resistant FRP membrane sheath
• 20 bar resistant membrane

Optional Features
• Acid dosage unit
• Antiscalant dosage unit
• Sodiummetabisulphide dosage unit
• pH and ORP control units
• Chemical vvashing unit (On seperate skid)
• Flushing (rinsing) valve

Advantages
• Easy to operate vvithout any need tor full time operator
• Low operating cost
• Ability to start and rinse automatically
• Easy to control visually by automation panel
• Fully Automation alarms

Design Criteria
• TDS < 2000 ppm
• Recovery ~%50 - %60
• 20 °C nominal operating temperature
• SDI < 3
• Iron < 0,01 mg/1
• Manganese/ Alluminium < 0,025 mg/l
• Barium, Strontium , rare
• Boron: none
• Silica < 20 ppm
• Free Chlorine, Oxidant Material: none
• Hydrocarbons, Oil and Grease: none
• Hydrogen Sulphide: none
• BOD, COD: none
• Bacteriologic Contaminants: None