I
I
I
PRODUCTS - Reverse Osmosis Systems
ROB Series Reverse Osmosis Systems

ROB Series Reverse Osmosis Systems

Standard design of ROB series reverse osmosis units is made according to 2000 ppm TDS (total dissolved solid matter) value. Systems’ operating efficiency is determined by making project specific designs according to the properties of raw water.

With 75 lt/hour - 220 lt/hour treatment capacity, it provides a perfect solution for treatment of potable water, general utility water and process water. Can be used conveniently in villas, restaurants and cafes (ice and soda machines) and laboratories. System contains PLC which is designed for controlling all of the equipments and does not need human intervention.

Standard Features
• ST37 chassis coated vvith electrostatic dye
• Conductivitymeter on permeate line
• Entrance automatic valve
• 5 micron filtration
• Permeate and wastewater flowmeter
• Low and high pressure manometer
• Pressure switches
• Low pressure lines PVC
• Automation panel
• Min. 3 bar entrance pressure requirement
• Max 16 bar operating pressure
• 300 psi (20 bar) resistant FRP membrane sheath
• 20 bar resistant membrane

Optional Features
• Easy to operate vvithout any need for full time operatör
• Low operating cost
• Ability to start and rinse automatically
• Easy to control visually by automation panel
• Fully Automation alarms

Design Criteria
• TDS < 2000 ppm
• Recovery ~% 50
• 20 °C nominal operating temperature
• SDI< 3
• Iron < 0,01 mg/l
• Manganese/ Alluminium < 0,025 mg/l
• Barium, Strontium , rare
• Boron: none
• Silica < 20 mg/l
• Free Chlorine, Oxidant Material: none
• Hydrocarbons, Oil and Grease: none
• Hydrogen Sulphide: none
• BOD, COD: none
• Bacteriologic Contaminants: None

Advantages
• Acid dosage unit
• Antiscalant dosage unit
• Sodiummetabisulphide dosage unit
• pH and ORP control units
• Chemical vvashing unit (On seperate skid)
• Flushing (rinsing) valve